Transporting the Wood
Description
Brief Description
Description
Logs are very heavy. To make them easier to transport, the trees were usually felled in May and stripped of their bark down to the treetop. This process was called “whitening.” The wood was then left lying on the ground until fall. During this time, something remarkable happened. The wood became significantly lighter. The “weisslegen” process allowed the moisture in the wood to evaporate through the treetops. The weight loss between the freshly felled wood in May and the dry wood in October was 30 to 40 percent. To then haul the wood out of the forest, people had to wait: for snow. If the forests were located away from a log-driving stream, the logs on steep slopes were transported downhill using sleds or horses. In the absence of horses, however, oxen were also used. In the valley, the logs were loaded onto carts and transported to the nearest sawmill or to their final destinations.
In inaccessible parts of the forest, people resorted to a different method: they built a charcoal kiln and carbonized the wood on the spot. The lightweight charcoal was then packed into sacks, hoisted onto their shoulders, and carried down into the valley.
Location
- Address
- Transporting the Wood Austria
Contact
- Website
- www.kennelbach.at New Window